ss 304/304l Pipe Fittings

ss 304/304l Pipe,Fittings,Flanges

Manufacture, Supplier, Stockist & Exporter

  • 304/304l Pipe ,tube fittings,ss 304 pipe, ss 304 bend,flanges,elbow manufacturer/supplier
  • 304 tube fittings,Pipe Fittings flanges supplier – ASTM A403,ASTM A240,ASTM A182
  • STAINLESS STEEL SS 304L PIPE,FITTINGS FLANGES STOCKIST

Ganpat Industrial Corporation is one of the leading Supplier , manufacturer and exporter of stainless steel 304/304l pipe,Fittings, tubes, Sheet, coil, filler wire, spectacle blind flanges, buttweld fittings, flanges,flat bar, circle, square pipe, coils,round bar, square pipe  etc in India. GIC offer product with NABL approved lab test report or EN-10204 .3.1 Certificates. GIC keep huge inventory of ss 304/304l pipe, ss 304/304l pipe fittings, ss 304/304l tube fittings, ss 304/304l buttweld fittings, ss 304/304l flanges, ss 304/304l filler wire, ss 304/304l spectacle blind flange, ss 304/304l sheet, ss 304/304l plate, ss 304l/304 flat bar, ss 304/304l circle , ss 304/304l hex bar, ss 304/304l square pipe, ss 304/304l rectangular pipe, ss 304/304l round bar , in Mill finished, Polished finished, sand blasted, annealed and pickled etc. SS 304/304L Belong to family commonly known as Austenitic Stainless Steel which exhibits excellent resistance to corrosive environment . ss 304l is  lower carbon version of ss 304, where as 304H guarantees maximum carbon . ss 304/304l are Dual Certified form particularly for plate and pipes where as ss 304H is not applicable for dual certified, Dual Certified is formed when its chemical and mechanical properties comply with both 304 & 304l. ss 304 is standard “18/8” stainless with higher Chromium and lower Carbon content . It is most commonly and widely used. ss 304 is Formability,Weldability ,corrosion and oxidation resistance . Ganpat Industrial Corporation maintain a huge stock of ss 304 bend and pipe fittings. GIC provide ss 304l pipe Fittings both in standard and non stand size . GIC exports ss 304 pipe fittings  in large quantity as well as small quantity as per demand . we also manufacturer ss 304 flanges in various sizes . we are also well equipped to manufacturer ss 304 flanges and ss 304 fittings of large dimension.

Products Available in SS 304

 Products

SS 304 Seamless pipeSS 304 Filler Wire
SS 304 welded pipeSS 304 Round Bar
SS 304 Square PipeSS 304 Hex Bar
SS 304 TubeSS 304 Sheet
SS 304 Pipe fittingsSS 304 Circle
SS 304 Tube FittingsSS 304 Flange
SS 304 Buttweld FittingsSS 304 Coil
SS 304 Forged FittingsSS 304 Spectacle Blind Flange
SS 304 OutletsSS 304 Flat Bar
SS 304 BendsSS 304 Fasteners/Nuts and bolts
SS 304 5D ElbowSS 304 Forged / Plate Circles
SS 304 3D BendSS 304 5D Bend

Products Available in SS 304L

 Products

SS 304l Seamless pipeSS 304l Filler Wire
SS 304l welded pipeSS 304l Round Bar
SS 304l Square PipeSS 304l Hex Bar
SS 304l TubeSS 304l Sheet
SS 304l Pipe fittingsSS 304l Circle
SS 304l Tube FittingsSS 304l Flange
SS 304l Buttweld FittingsSS 304l Coil
SS 304l Forged FittingsSS 304l Spectacle Blind Flange
SS 304l OutletsSS 304l Flat Bar
SS 304l BendsSS 304l Fasteners/Nuts and bolts
SS 304l 5D ElbowSS 304l Forged / Plate Circles
SS 304l 3D BendSS 304l 5D Bend

Products Available in SS 304H

 Products

SS 304H Seamless pipeSS 304H Filler Wire
SS 304H welded pipeSS 304H Round Bar
SS 304H Square PipeSS 304H Hex Bar
SS 304H TubeSS 304H Sheet
SS 304H Pipe fittingsSS 304H Circle
SS 304H Tube FittingsSS 304H Flange
SS 304H Buttweld FittingsSS 304H Coil
SS 304H Forged FittingsSS 304H Spectacle Blind Flange
SS 304H OutletsSS 304H Flat Bar
SS 304H BendsSS 304H Fasteners/Nuts and bolts
SS 304H 5D ElbowSS 304H Forged / Plate Circles
SS 304H 3D BendSS 304H 5D Bend

Chemical Composition

ss 304 pipe Fittings

 SS 304

Carbon0.08 Max.
Manganese2.00 Max.
Sulfure0.030 Max.
Silicon0.075 Max.
Phosphorus0.045 Max.
Chromium18.00-20.00
Nickel8.00-12.00
Nitrogen0.10 Max.
IronBalance

Mechanical Properties

ss 304 pipe fittings

 SS 304

Densilty8.0 g/cm3
Melting Point1400 °C (2550 °F)
Tensile StrenghtPsi – 75000,MPa- 515
Yield Strength (0.2% offset)PSi – 3000, MPa- 205
Elongation35%

Application for ss 304/304l pipe , fittings and flanges

  • Industrial Fabrication
  • Equipment and Appliances
  • Heat Exchanges
  • Architectural Railing
  • Food processing equipment
  • Pharmaceutical and chemical process equipment
  • Heat exchangers
  • Textile
  • Springs
  • Chemical Containers
  • Dyeing Industries
  • Nuts ,Bolts , Fasteners and other in marine Environment
  • Automotive and Aerospace structural use

Key Properties of SS 304

ss 304 pipe fittings and ss 304l pipe fittings

  • ss 304 and 304l exhibit excellent resistance to corrosive environment such as textile and petroleum industries
  • ss 304 can me exposed to maximum temperature of scaling to 1650 °F
  • ss 304 is non-hardenable by heat treatment
  • ss 304 is very ductile and can be easily cold worked by bending, deep drawing
  • ss 304 are can be considered to be weldable with fusion and resistance technique

Other Properties

304/304l pipe fittings

  • Cold Working – 304 are very ductile and can be easily cold world by deep drawing, bending etc . High Hardness and strength is achieved should cold working
  • Formability – 304 & 304l is highly formability due to its combination of lower strength and shapes
  • Weldability – Stainless steel is considered as weldable by common fusion and resistance technique
  • Corrosion Resistance – SS 304 & 304l exhibits resistance to corrosive environments such as textile and petroleum industries
  • Oxidation Resistance – 304 can be exposed to maximum temperature of 1650°F
  • Heat Theatment – SS 304 is non-hardenable by heat treatment

Additional Service

ss 304/304l pipe fittings

  • Quality Assurance – Ganpat Industrial Corporation Undergoes Inspection from starting point of purchasing product till the product is dispatched.
  • Packing & Marking – Ganpat Industrial Corporation pack the ss 304l pipe fittings according to standard packing so as to avoid the damages during the transit , Goods are packed in export standard wooden boxes. Packing is as per sea worthy packing and air worthy packing .
  • Standard Product – Ganpat Industrial Corporation maintain and Examine the pipe fittings as per standard size and provide visual conformity of to ASTM,ASME,DIN,EN,MSS and JIS code of standard
  • Testing Facility  – Ganpat Industrial Corporation provides number of testing facility on request such as Positive Material Identification Test (PMI), Chemical Test , 100% Radiography Test and many More.
  • Test Certificates – Ganpat Industrial Corporation Provides MTC (material test certificates)  for pipe fittings and flanges as per 3.1 , Raw Material Certificates, Third Party Inspection Report, 100% Radiography Report, PMI reports etc .GIC provides this certificates sticky along with the goods only
  • Origin – Ganpat Industrial Corporation maintain a huge Stock of SS 304 pipe fittings and flanges of Indian, European and Japan Origin.
  • Ganpat Industrial Corporation can also process or Undergo beveling process at the end or edge of the pipe for welding or other purpose
  • Ganpat Industrial Corporation provides Heat treatment to undergo some mechanical changes

We even export 304/304l pipe fittings and flanges to more than 45 countries like UAE, USA, Brazil, Chile, New York,Iran, Qatar, Iraq, Australia, Indonesia, Oman, Italy, Germany, Kuwait , Finland, Jordan, Singapore, Malasiya, Bahrain, Jordan, Saudo Arabia, Netherland, Canada, Italy, Serbia, Turkey, Mexico, Egypt, Venezuela, Poland, South Africa, Peru, Madagascar, Srilanka, Yemen, Nigeria, Vietnam, Russia, Switzerland, Denmark, Ireland, Israel, South Korea,Romania, Argentina, Colombia, Norway , Fiji, Ghana, Greece, Syria, Dubai, Bangkok.

We Even Supplied this Welded Pipe across all Major Cities like Mumbai, Kolkata,Chennai, Delhi, Hyderabad, Nasik, Pune, Tamil Nadu, Kerala , Surat, Gujarat, Rajasthan, Nagpur, Indore, Thane , Ranchi , Vadodara, Bhiwandi, Assam , Ankleshwar , Mangalore,Bangalore etc.

For More Detail and Quick Quote

dhruvilss 304/304l Pipe Fittings